MINWAX CO INC -- 13775, POLYURETHANE CLEAR SATIN FINISH -- 8010-00N032975
=====================  Product Identification  =====================

Product ID:13775, POLYURETHANE CLEAR SATIN FINISH
MSDS Date:08/01/1988
FSC:8010
NIIN:00N032975
MSDS Number: BPQBP
=== Responsible Party ===
Company Name:MINWAX CO INC
Address:102 CHESTNUT RIDGE PLAZA
City:MONTVALE
State:NJ
ZIP:07645
Country:US
Info Phone Num:201-391-0253
Emergency Phone Num:201-391-0253
CAGE:HO333
=== Contractor Identification ===
Company Name:MINWAX CO INC
Address:15 MERCEDES DR
Box:City:MONTVALE
State:NJ
ZIP:07645
Country:US
Phone:201-391-0253
CAGE:HO333
Company Name:MINWAX COMPANY
Address:10 MOUNTAINVIEW ROAD
Box:City:UPPER SADDLE RIVER
State:NJ
ZIP:07458
Country:US
Phone:800-523-9299/216-566-2917
CAGE:0K1A4

=============  Composition/Information on Ingredients  =============

Ingred Name:STODDARD SOLVENT; (MINERAL SPIRITS)
CAS:8052-41-3
RTECS #:WJ8925000
Fraction by Wt: 53.10%
OSHA PEL:500 PPM
ACGIH TLV:100 PPM; 9293

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EYES: SEVERE IRRITATION, REDNESS,
    TEARING OR BLURRED VISION. SKIN: CAN CAUSE DEFATTING AND DRYING OF
    SKIN LEADING TO IRRITATION AND DERMATITIS. INGEST: CAN CAUSE GI
    IRRITATION, NAUSEA, VOMITING AND DI ARRHEA. ASPIRATION CAN BE FATAL
    DUE TO CHEMICAL PNEUMONITIS. INHAL: CAN CAUSE NASAL & RESPIRATORY
    (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: IRRITATION, DIZZINESS, WEAKNESS,
    FATIGUE, NAUSEA, HEADACHE, NERVOUS IRRITABILITY.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:EYE: FLUSH WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES.
    SKIN: WASH WITH SOAP AND WATER. INGEST: DO NOT INDUCE VOMITING.
    CALL PHYSICIAN IMMEDIATELY. KEEP PATIENT WARM & QUIET. INHAL:
    REMOVE TO FRESH A IR. AID IN BREATHING IF NECESSAARY. CALL A
    PHYSICIAN.

=====================  Fire Fighting Measures  =====================

Flash Point:105F,41C
Lower Limits:0.9%
Upper Limits:6%
Extinguishing Media:CO2, DRY CHEMICAL, ALCOHOL FOAM AND WATER FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
    PROTECTIVE EQUIPMENT . USE WATER TO COOL EXPOSED CONTAINERS.
Unusual Fire/Explosion Hazard:PRODUCT GIVES OFF TOXIC BY-PRODUCTS WHEN
    BURNED.

==================  Accidental Release Measures  ==================

Spill Release Procedures:PROVIDE ADEQUATE VENTILATION. SOAK UP WITH
    ABSORBENT MATERIAL AND PLACE IN LEAK PROOF DRUMS FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT STORE/USE NEAR HEAT/SPARKS/OPEN
    FLAME. CLOSE CONTR AFTER EACH USE. STORE ONLY IN ORIGINAL CONTR.
    WASH W/ SOAP/H2O BEFORE EAT/DRINK/SMOKING.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED FULL FACE/HALF-MASK AIR
    PURIFYING RESPIRATOR IF NEEDED.
Ventilation:PROVIDE CONSTANT FLOW OF FRESH AIR. LOCAL
    EXHAUST/MECHANICAL AS NEEDED.
Protective Gloves:RUBBER, NEOPRENE.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:APRONS, BOOTS, ARM GUARDS OR FULL BODY SUIT.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

HCC:F4
Boiling Pt:B.P. Text:313F,156C
Vapor Pres:2
Vapor Density:4.8
Spec Gravity:0.864
Solubility in Water:NIL
Appearance and Odor:OPAQUE AMBER LIQUID; MILD HYDROCARBON ODOR
Percent Volatiles by Volume:55.4

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:CO, CO2 AND UNIDENTIFIED ORGANIC
    COMPOUNDS.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH FEDERAL, STATE AND
    LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.