HUMCO LABORATORY, INC. -- ISOPROPYL ALCOHOL, ANHYDROUS -- 6505-00-205-6513
=====================  Product Identification  =====================

Product ID:ISOPROPYL ALCOHOL, ANHYDROUS
MSDS Date:05/09/1990
FSC:6505
NIIN:00-205-6513
=== Responsible Party ===
Company Name:HUMCO LABORATORY, INC.
Address:1008 WHITAKER STREET
Box:2550
City:TEXARKANA
State:TX
ZIP:75501-2550
Country:US
Info Phone Num:214-793-3174
Emergency Phone Num:903-793-3174
CAGE:61757
=== Contractor Identification ===
Company Name:HUMCO LABORATORY, INC.
Address:1008 WHITAKER STREET
Box:2550
City:TEXARKANA
State:TX
ZIP:75501-2550
Country:US
Phone:214-793-3174
CAGE:61757

=============  Composition/Information on Ingredients  =============

Ingred Name:ISOPROPYL ALCOHOL  (SARA III)
CAS:67-63-0
RTECS #:NT8050000
Fraction by Wt: 100%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:400 PPM/500 STEL
ACGIH TLV:400 PPM/500STEL;9293

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:ORAL LD50 (RAT) IS 5840 MG/KG
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EYE, SKIN & RESPIRATORY TRACT
    IRRITATION. MAY INJURE EYE TISSUE. MAY CAUSE DERMATITIS. VAPOR IS
    ANESTHETIC & MAY CAUSE HEADACHES, DIZZINESS & OTHER CENTRAL NERVOUS
    SYSTEM EFFECTS. SMALL AMOUNTS OF LIQ UID ASPIRATED INTO THE
    RESPIRATORY SYSTEM DURING INGESTION OR VOMITING MAY CAUSE
    BRONCHIOPNEUMONIA OR PULMONARY EDEMA.
Explanation of Carcinogenicity:THIS PRODUCT IS NOT LISTED BY IARC, NTP
    OR OSHA AS A CARCINOGEN, MUTAGEN, TERATOGEN OR NEUROTOXIN.
Effects of Overexposure:INHALATION CAN CAUSE MILD IRRITATION, NARCOSIS,
    NAUSEA AND HEADACHE. EYE CONTACT WILL CAUSE IRRITATION & BURNING.
    SKIN CONTACT WILL CAUSE STINGING AND BURNING SENSATION. INGESTION
    WILL CAUSE BURNING S ENSATIONS OF THE DIGESTIVE TRACT ALONG WITH
    NAUSEA, VOMITING, BLEEDING AND CNS DEPRESSION.
Medical Cond Aggravated by Exposure:THERE IS NO KNOWN MEDICAL
    CONDITIONS ABNORMALLY AGGRAVATED BY EXPOSURE TO THIS PRODUCT.

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH WITH RUNNING WATER FOR 15 MINUTES, LIFTING
    EYELIDS. GET PROMPT MEDICAL ATTENTION. SKIN: REMOVE CONTAMINATED
    CLOTHING. WASH SKIN WITH SOAP AND WATER. INHALATION: REMOVE TO
    FRESH AIR. PROVID E OXYGEN IF BREATHING IS DIFFICULT.
    GIVEARTIFICIAL RESPIRATION IF NOT BREATHING. GET MEDICAL ATTENTION.
    INGESTION: GET MEDICAL ATTENTION. IF CONSCIOUS, DILUTE BY DRINKING
    WATER AND INDUCE VOMITING.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:54.0F,12.2C
Autoignition Temp:Autoignition Temp Text:662F
Lower Limits:2.0
Upper Limits:12.0
Extinguishing Media:USE ALCOHOL TYPE FOAM OR DRY CHEMICAL TO EXTINGUISH
    FIRE OR ALLOW TO BURN UNDER CONTROLLED CONDITIONS.
Fire Fighting Procedures:USE WATER SPRAY TO COOL FIRE EXPOSED SURFACES
    AND TO PROTECT PERSONNEL. IF A LEAK OR SPILL HAS NOT IGNITED, USE
    WATER SPRAY TO DISPERSE VAPORS. WEAR SCBA.
Unusual Fire/Explosion Hazard:WATER STREAM MAY BE INEFFECTIVE DUE TO
    LOW FLASH POINT. A MODERATE EXPLOSION HAZARD EXISTS WHEN THIS
    MATERIAL IS EXPOSED TO HEAT OR FLAMES.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ELIMINATE SOURCES OF IGNITION. ABSORB SMALL
    SPILLS WITH INERT MATERIAL. VENTILATE SPILL AREA AND EVAPORATE
    FLAMMABLE ALCOHOL FROM ABSORBENT IN EXHAUST HOOD. PREVENT LIQUID
    FROM ENTERING SEWERS, WATERC OURSES OR LOW AREAS.
Neutralizing Agent:NONE

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN A CLEAN, COOL, VENTILATED
    AREA AWAY FROM SOURCES OF IGNITION AND OXIDIZING AGENTS. HANDLE AND
    STORE AS AN OSHA CLASS IB FLAMMABLE LIQUID.
Other Precautions:LIQUID CAN RELEASE VAPORS THAT FORM FLAMMABLE
    MIXTURES AT TEMPERATURES AT OR ABOVE THE FLASHPOINT. "EMPTY"
    CONTAINERS RETAIN PRODUCT RESIDUE AND VAPORS WHICH CAN BE IGNITED
    AND EXPLODE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:PROVIDE NIOSH/MSHA APPROVED SELF-CONTAINED OR
    AIR-SUPPLIED BREATHING APPARATUS WITH FULL FACEPIECE FOR
    NON-ROUTINE OR EMERGENCY USE ABOVE THE PEL/TLV.
Ventilation:PROVIDE GENERAL AND EXHAUST VENTILATION (EXPLOSION-PROOF)
    TO MEET TLV REQUIREMENTS. EXHAUST HOODS=100 LFM FACE VELOCITY.
Protective Gloves:NEOPRENE GLOVES
Eye Protection:CHEMICAL GOGGLES FOR SPLASH DANGER.
Other Protective Equipment:EYE WASH STATION & SAFETY SHOWER WHERE GROSS
    SPILLS OR SPLASHING CAN OCCUR. USE APRONS WHERE NECESSARY TO AVOID
    CONTACT.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING. DO NOT SMOKE OR
    EAT IN AREAS OF STORAGE OR USE.
Supplemental Safety and Health
PREPLACEMENT AND PERIODIC MEDICAL EXAMINATIONS SHOULD EMPHASIZE SKIN,
    SINUSES, AND THE RESPIRATORY SYSTEM. KEEP RECORDS. PROVIDE SUITABLE
    TRAINING TO THOSE WORKING WITH ISOPROPANOL. LAUNDER CONTAMINAT ED
    WORK CLOTHING PRIOR TO REUSE. NAVY SUPPLIED MSDS.

==================  Physical/Chemical Properties  ==================

HCC:F2
Boiling Pt:B.P. Text:180F,85C
Melt/Freeze Pt:M.P/F.P Text:-127F,-88C
Vapor Pres:33
Vapor Density:2.07
Spec Gravity:0.78
Viscosity:2 CST @ 68F
Evaporation Rate & Reference:2.3 (N-BUTYL ACETATE=1)
Solubility in Water:COMPLETE
Appearance and Odor:CLEAR, COLORLESS LIQUID WITH RUBBING ALCOHOL ODOR.
Percent Volatiles by Volume:100

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, ACETALDEHYDE, CHLORINE, ETHYLENE OXIDE, ACIDS,
    ISOCYANATES
Hazardous Decomposition Products:THERMAL-OXIDATIVE DEGRADATION PRODUCTS
    CAN INCLUDE CARBON MONOXIDE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:BURN WASTE LIQUID IN AN APPROVED INCINERATOR OR
    DISPOSE OF VIA LICENSED WASTE DISPOSAL COMPANY. ABSORBED LIQUID CAN
    BE LANDFILLED. FOLLOW FEDERAL, STATE, AND LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.