BIOTROL INTERNATIONAL -- BIREXSE -- 6850-00N060977 ===================== Product Identification =====================
Product ID:BIREXSE
MSDS Date:11/01/1991
FSC:6850
NIIN:00N060977
MSDS Number: BXXFK
=== Responsible Party ===
Company Name:BIOTROL INTERNATIONAL
Address:650 S TAYLOR AVE
City:LOUISVILLE
State:CO
ZIP:80027
Country:US
Info Phone Num:303-673-0341
Emergency Phone Num:800-822-8550
CAGE:GO382
=== Contractor Identification ===
Company Name:BIOTROL INTERNATIONAL
Address:650 S TAYLOR AVE STE 20
City:LOUISVILLE
State:CO
ZIP:80027-5000
Country:US
Phone:303-673-0341/800-822-8550
CAGE:GO382
Company Name:BIOTROL INTL
Address:650 S TAYLOR AVE
Box:City:LOUISVILLE
State:CO
ZIP:80027
Country:US
Phone:800-822-8550
CAGE:0SWF1
============= Composition/Information on Ingredients =============
Ingred Name:PHENOL, P-(TERT-PENTYL)-; (P-TERTIARY AMYLPHENOL)
CAS:80-46-6
RTECS #:SM6825000
Fraction by Wt: 7.4%
OSHA PEL:N/K
ACGIH TLV:N/K
Ingred Name:2-BIPHENOL; (2-PHENYLPHENOL) (SARA 313)
CAS:90-43-7
RTECS #:DV5775000
Fraction by Wt: 7.3%
OSHA PEL:N/K
ACGIH TLV:N/K
Ingred Name:PHOSPHORIC ACID (SARA 313) (CERCLA)
CAS:7664-38-2
RTECS #:TB6300000
Fraction by Wt: 15%
OSHA PEL:1 MG/M3
ACGIH TLV:1 MG/M3;3 STEL
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Ingred Name:ISOPROPYL ALCOHOL (SARA 313)
CAS:67-63-0
RTECS #:NT8050000
Fraction by Wt: 7%
OSHA PEL:400 PPM
ACGIH TLV:400 PPM;500 STEL
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:CONCENTRATE CORROSIVE TO TISSUES. USE
DILUTION SLIGHTLY IRRITATING TO EYES. CONCENTRATE SEVERELY
IRRITATING TO SKIN & EYES. WILL CAUSE UPSET TO STOMACH.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
======================= First Aid Measures =======================
First Aid:INHAL:REMOVE SOURCES OF IGNITION; CALL MD IF IRRITATION
PERSISTS. EYES:IMMEDIATELY FLUSH W/PLENTY OF WATER FOR AT LEAST 15
MINUTES. CALL MD. SKIN:IMMEDIATELY WASH W/PLENTY OF WATER FOR AT
LEAST 15 MIN UTES. REMOVE & WASH CONTAMINATED CLOTHING BEFORE
REUSE. INGEST:DO NOT INDUCE VOMITING. DRINK LARGE QUANTITIES OF
FLUID & CALL MD.
===================== Fire Fighting Measures =====================
Flash Point Method:CC
Flash Point:111F,44C
Extinguishing Media:FOAM, CO*2.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
================== Accidental Release Measures ==================
Spill Release Procedures:MAY BE CLEANED UP W/FLOWING WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:READ & OBSERVE LABELD USE
INSTRUCTIONS.
Other Precautions:PRODUCT WILL W/STAND OCCASIONAL ACCIDENTAL FREEZING
W/OUT LOSS IN ITS NORMAL PERFORMANCE CHARACTERISTICS. IT MUST BE
THOROUGHLY THAWED & AGITATED BEFORE BEING USED.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN . NONE NORMALLY REQUIRED.
Ventilation:NORMAL VENTILATION.
Protective Gloves:RUBBER GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS(SUPDAT)
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA .
Work Hygienic Practices:COMMON SENSE FOR SAFETY.
Supplemental Safety and Health
PH:1; USE DILUTION (1:256). EYE PROT:& FULL LENGTH FACESHIELD .
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:212F,100C
Spec Gravity:1.11 (H*2O=1)
pH:SUPDAT
Solubility in Water:COMPLETE
Appearance and Odor:BROWN LIQUID; MILD, PLEASANT ODOR.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
NO INCOMPATIBILITY KNOWN.
Stability Condition to Avoid:THIS IS A COMPLETE PRODUCT. DO NOT ADD
OTHER CHEMICALS TO CONCENTRATE OR USE-SOLUTIONS.
Hazardous Decomposition Products:FORCED IGNITION OF DRIED RESIDUES MAY
PRODUCE CO, CO*2 & SULFUR OXIDES.
==================== Disposal Considerations ====================
Waste Disposal Methods:CONSULT FEDERAL, STATE & LOCAL REGULATIONS.
WASTE SOLUTIONS MAY BE SEWERED.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.